DRAM

Definition

Dynamic Random Access Memory (DRAM) is a type of volatile memory that stores each bit of data in a separate capacitor within an integrated circuit. Due to its design, DRAM requires constant refreshing to maintain the data, making it distinct from other types of memory like SRAM. It is widely used in embedded systems for temporary data storage due to its balance between density and speed.

5 Must Know Facts For Your Next Test

1. DRAM is commonly used as the main memory in computers and many embedded systems because it offers a good compromise between speed and storage capacity.
2. Unlike SRAM, DRAM cells are smaller, allowing for higher density and more memory to be packed into a smaller physical space.
3. The need for refreshing every few milliseconds makes DRAM slower than SRAM, impacting performance in high-speed applications.
4. DRAM operates using a simple mechanism where a transistor and capacitor store each bit, but the charge stored in capacitors gradually leaks away, necessitating periodic refresh cycles.
5. Different types of DRAM exist, such as SDRAM (Synchronous DRAM) and DDR (Double Data Rate), each designed to improve speed and efficiency over traditional DRAM.

Review Questions

• Compare and contrast DRAM with SRAM in terms of performance, capacity, and use cases.
  • DRAM and SRAM differ primarily in speed and structure. While SRAM is faster because it doesn't require refreshing and uses multiple transistors per bit, it is also more expensive and less dense than DRAM. This makes DRAM more suitable for applications where large amounts of memory are required but speed is less critical. In contrast, SRAM is typically used in cache memory for CPUs due to its high speed. The choice between them depends on the specific requirements of the embedded system.
• Discuss the impact of DRAM's need for refreshing on its application in real-time embedded systems.
  • The refreshing requirement of DRAM can pose challenges for real-time embedded systems that demand consistent response times. Since data needs to be periodically refreshed, there could be latency introduced during these refresh cycles. This makes DRAM less ideal for time-sensitive applications compared to non-volatile memories or SRAM. However, its high density and cost-effectiveness allow it to still be widely utilized in scenarios where some latency can be tolerated.
• Evaluate the future trends in DRAM technology and how they might influence embedded system design.
  • Future trends in DRAM technology aim to enhance speed, reduce power consumption, and increase storage capacity while addressing the limitations of traditional designs. Innovations such as 3D stacking and new architectures could lead to higher performance DRAM that integrates better with CPUs and GPUs, influencing embedded system design significantly. This evolution may allow for more complex applications on compact devices while managing energy efficiency effectively. As systems become increasingly data-driven, advancements in DRAM will be crucial for accommodating larger data sets and faster processing speeds.

Related terms

SRAM: Static Random Access Memory (SRAM) is a type of memory that retains data bits in its memory as long as power is being supplied, without needing to refresh the data continuously.

Volatile Memory: Volatile memory refers to storage that loses its contents when power is turned off, with DRAM being one of the most common types.

Memory Hierarchy: Memory hierarchy is the organization of various types of memory in a computer system, ranging from the fastest and most expensive (like registers) to slower and cheaper types (like DRAM).