---
title: "Graetz Number | Heat and Mass Transfer"
description: "Graetz Number measures thermal development in duct flow, showing how geometry, flow rate, and diffusion affect convection and entry length in Heat and Mass Transfer."
canonical: "https://fiveable.me/heat-mass-transfer/key-terms/graetz-number"
type: "key-term"
subject: "Heat and Mass Transfer"
unit: "Unit 3"
---

# Graetz Number | Heat and Mass Transfer

## Definition

The Graetz Number is a dimensionless number for flow in a duct or pipe that compares thermal development to axial transport. In Heat and Mass Transfer, it helps estimate whether the fluid is still developing its temperature profile.

## What It Is

The Graetz Number is a dimensionless group used in Heat and Mass Transfer to describe thermal development in internal flow, especially inside pipes and ducts. It tells you whether the temperature field is still changing a lot along the flow direction or whether the flow has had enough distance to become thermally developed.

For a duct flow, it is commonly written as Grz = (D/L)(Re/Pr), where D is the hydraulic or characteristic diameter, L is the heated length, Re is the Reynolds number, and Pr is the Prandtl number. Since Reynolds number captures the balance of inertial and viscous effects and Prandtl number compares momentum diffusion to thermal diffusion, the Graetz Number combines the flow condition with the geometry of the passage.

A short duct or a low flow rate gives one kind of behavior, while a long duct or faster flow gives another. When the Graetz Number is high, the fluid has less time to thermally develop over the length of the duct, so the temperature profile still changes downstream. When it is low, heat has more time to spread across the cross section, and the temperature field moves closer to a fully developed condition.

This makes the Graetz Number especially useful in laminar internal flow. In the entrance region, the wall temperature gradient is changing rapidly, so the local convection coefficient is not constant. The Graetz Number helps you connect that entrance behavior to the thermal entry length, which is the distance needed before the shape of the temperature profile stops evolving with x.

A common mistake is to treat the Graetz Number like a standalone material property. It is not. It depends on the duct size, the heated length, the flow regime through Re, and the fluid’s thermal behavior through Pr, so it changes when the setup changes.

You will also see it used when comparing heat exchanger passages or other long channel problems. Instead of asking only how fast the fluid is moving, the Graetz Number asks how much thermal development can happen over the available length of the duct.

## Why It Matters

The Graetz Number matters because internal convection is not always uniform from the inlet to the outlet. In many heat transfer problems, the entrance region is where the action is, since the thermal boundary layer starts thin and then grows until the temperature profile settles into a more predictable shape.

If you can interpret the Graetz Number, you can tell whether a duct should be modeled as thermally developing or close to fully developed. That changes the heat transfer coefficient, the wall heat flux prediction, and sometimes the whole design choice for a pipe or heat exchanger passage.

It also gives you a fast way to compare different geometries. A shorter heated length or a larger diameter changes the ratio in the formula, so two ducts carrying the same fluid at the same speed may not behave the same thermally. That is why engineers use dimensionless groups instead of only raw lengths and velocities.

In problem sets, this term often shows up when you are asked to estimate entry length, classify the flow region, or decide whether a fully developed assumption is reasonable. It connects the fluid mechanics side of the course, through Reynolds number, with the heat transfer side, through Prandtl number and the boundary layer picture.

## Connections

### [Nusselt Number](/heat-mass-transfer/key-terms/nusselt-number)

The Nusselt Number tells you how strong convection is compared with pure conduction at the wall. The Graetz Number often sets up the situation that determines how the Nusselt Number changes along a duct, especially in the entrance region where the thermal boundary layer is still growing.

### [Reynolds Number](/heat-mass-transfer/key-terms/reynolds-number)

Reynolds number appears inside the Graetz Number, so the flow rate and regime matter directly. If Re changes, the balance of inertia and viscosity changes too, which affects how quickly the thermal field develops along the duct.

### [Thermal Entry Length](/heat-mass-transfer/key-terms/thermal-entry-length)

Thermal entry length is the physical distance the fluid needs before its temperature profile becomes fully developed. The Graetz Number is often used to estimate whether the heated section is long enough for that to happen, especially in laminar internal flow.

### [Convective Heat Transfer Coefficient](/heat-mass-transfer/key-terms/convective-heat-transfer-coefficient)

The convection coefficient is usually higher near the inlet because the thermal boundary layer is thinner there. The Graetz Number helps explain that variation, since a larger value usually means the flow is still thermally developing and the local heat transfer rate is not yet settled.

## On the AP Exam

A problem set will usually ask you to calculate the Graetz Number, decide whether a tube is thermally developing, or check whether a fully developed assumption makes sense. You may also be asked to use it with entry length ideas, then choose the right heat transfer correlation for laminar internal flow.

In a quiz or lab report, the move is to connect the number to what the temperature profile is doing. If the Graetz Number is large, you explain that the fluid has not had enough distance to spread heat across the whole cross section. If it is small, you argue that axial development is closer to complete. The real skill is not just plugging into the formula, but interpreting what that means for wall temperature, local heat transfer coefficient, and whether your model should treat the duct as entrance region or fully developed flow.

## Graetz Number vs Nusselt Number

The Graetz Number and Nusselt Number both show up in convection, but they answer different questions. Graetz Number is about how developed the temperature field is in a duct, while Nusselt Number is about how strong convection is relative to conduction at the wall. You often use Graetz Number to judge the flow condition, then use Nusselt Number correlations to find the heat transfer coefficient.

## Key Takeaways

- Graetz Number is a dimensionless measure of thermal development in duct or pipe flow.
- It combines geometry, Reynolds number, and Prandtl number, so it changes with both the fluid and the channel size.
- A high Graetz Number usually means the flow is still thermally developing, while a low value points toward a more developed temperature profile.
- It is most useful in internal laminar flow problems where entry effects matter a lot.
- You use it to decide whether an entrance-region model or a fully developed heat transfer model fits the situation.

## FAQs

### What is Graetz Number in Heat and Mass Transfer?

Graetz Number is a dimensionless number used for flow in a duct or pipe to measure thermal development. It helps describe whether the temperature field is still changing along the length of the channel or has mostly settled into a developed profile.

### How do you calculate the Graetz Number?

A common form is Grz = (D/L)(Re/Pr), where D is the characteristic diameter, L is the heated length, Re is Reynolds number, and Pr is Prandtl number. The exact form can vary with how a problem defines the characteristic length, but the meaning stays the same.

### What does a high Graetz Number mean?

A high Graetz Number usually means the fluid has not had much thermal development over the available length. That points to a longer entrance region and a temperature profile that still changes downstream.

### Is Graetz Number the same as Nusselt Number?

No. Graetz Number tells you about thermal development in internal flow, while Nusselt Number compares convection to conduction at the wall. They work together in heat transfer problems, but they are not interchangeable.

## Related Study Guides

- [3.1 Boundary Layers and Convection Coefficients](/heat-mass-transfer/unit-3/boundary-layers-convection-coefficients/study-guide/QKnBMxoehYZs43wA)

## About This Document

Canonical Fiveable pages are available as Markdown at the same path plus `.md`.

- [llms.txt](https://fiveable.me/llms.txt): index of Fiveable's sections and URL patterns
- [llms-full.txt](https://fiveable.me/llms-full.txt): complete subject and unit listing
- [MCP server](https://fiveable.me/mcp): call Fiveable as tools instead of fetching pages (`https://fiveable.me/api/mcp`)
- [MCP server for AP teachers](https://fiveable.me/mcp/teachers): a teacher's classes, assignments and AP-rubric grading (`https://fiveable.me/api/mcp/teacher`)

## Structured Data

```json
{"@context":"https://schema.org","@graph":[{"@type":"LearningResource","@id":"https://fiveable.me/heat-mass-transfer/key-terms/graetz-number#resource","name":"Graetz Number | Heat and Mass Transfer","url":"https://fiveable.me/heat-mass-transfer/key-terms/graetz-number","learningResourceType":"Concept explainer","educationalLevel":"AP® / High School","about":{"@id":"https://fiveable.me/heat-mass-transfer/key-terms/graetz-number#term"},"audience":{"@type":"EducationalAudience","educationalRole":"student"},"dateModified":"2026-07-03T02:21:35.298Z","isPartOf":{"@type":"Collection","name":"Heat and Mass Transfer Key Terms","url":"https://fiveable.me/heat-mass-transfer/key-terms"},"author":{"@type":"Organization","@id":"https://fiveable.me/editorial#content-team","name":"Fiveable Content Team","url":"https://fiveable.me/editorial","parentOrganization":{"@id":"https://fiveable.me/#organization"},"member":[{"@type":"Person","name":"Amanda DoAmaral","sameAs":["https://www.linkedin.com/in/adoamaral"]},{"@type":"Person","name":"Becky Bahr","sameAs":["https://www.linkedin.com/in/becky-bahr-b52743132"]}]},"publisher":{"@type":"Organization","name":"Fiveable","url":"https://fiveable.me"}},{"@type":"DefinedTerm","@id":"https://fiveable.me/heat-mass-transfer/key-terms/graetz-number#term","name":"Graetz Number","description":"The Graetz Number is a dimensionless number for flow in a duct or pipe that compares thermal development to axial transport. In Heat and Mass Transfer, it helps estimate whether the fluid is still developing its temperature profile.","url":"https://fiveable.me/heat-mass-transfer/key-terms/graetz-number","inDefinedTermSet":{"@type":"DefinedTermSet","name":"Heat and Mass Transfer Key Terms","url":"https://fiveable.me/heat-mass-transfer/key-terms"}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is Graetz Number in Heat and Mass Transfer?","acceptedAnswer":{"@type":"Answer","text":"Graetz Number is a dimensionless number used for flow in a duct or pipe to measure thermal development. It helps describe whether the temperature field is still changing along the length of the channel or has mostly settled into a developed profile."}},{"@type":"Question","name":"How do you calculate the Graetz Number?","acceptedAnswer":{"@type":"Answer","text":"A common form is Grz = (D/L)(Re/Pr), where D is the characteristic diameter, L is the heated length, Re is Reynolds number, and Pr is Prandtl number. The exact form can vary with how a problem defines the characteristic length, but the meaning stays the same."}},{"@type":"Question","name":"What does a high Graetz Number mean?","acceptedAnswer":{"@type":"Answer","text":"A high Graetz Number usually means the fluid has not had much thermal development over the available length. That points to a longer entrance region and a temperature profile that still changes downstream."}},{"@type":"Question","name":"Is Graetz Number the same as Nusselt Number?","acceptedAnswer":{"@type":"Answer","text":"No. Graetz Number tells you about thermal development in internal flow, while Nusselt Number compares convection to conduction at the wall. They work together in heat transfer problems, but they are not interchangeable."}}]},{"@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","position":1,"name":"Heat and Mass Transfer","item":"https://fiveable.me/heat-mass-transfer"},{"@type":"ListItem","position":2,"name":"Key Terms","item":"https://fiveable.me/heat-mass-transfer/key-terms"},{"@type":"ListItem","position":3,"name":"Unit 3","item":"https://fiveable.me/heat-mass-transfer/unit-3"},{"@type":"ListItem","position":4,"name":"Graetz Number"}]}]}
```