--- title: "AP Physics C: E&M 8.4: Charge Distributions" description: "Review AP Physics C: E&M electric fields of charge distributions, including dq setup, symmetry, rings, arcs, line charges, cylinders, and field integrals." canonical: "https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM" type: "study-guide" subject: "AP Physics C: E&M" unit: "Unit 8 – Electric Charges & Fields: Gauss's Law" lastUpdated: "2026-06-09" --- # AP Physics C: E&M 8.4: Charge Distributions ## Summary Review AP Physics C: E&M electric fields of charge distributions, including dq setup, symmetry, rings, arcs, line charges, cylinders, and field integrals. ## Guide Electric fields of charge distributions are found by adding up tiny field contributions with an integral. You break the object into infinitesimal [charge](/ap-physics-c-e-m/unit-10/2-redistribution-of-charge-between-conductors/study-guide/3zelmsMupFfJh7VP "fv-autolink") elements $dq$, write the field each one makes, use [symmetry](/ap-physics-c-e-m/key-terms/symmetry "fv-autolink") to cancel components, and integrate. ## Why This Matters for the AP Physics C: E&M Exam This topic is core to [Unit 8](/ap-physics-c-e-m/unit-8 "fv-autolink"), the highest-weighted unit on the multiple-choice section. The first free-response question on the [AP Physics C: E&M](/ap-physics-c-e-m "fv-autolink") exam focuses on mathematical routines: deriving a symbolic expression for a physical quantity, sometimes ending in a numerical calculation. Setting up $\vec{E}=\frac{1}{4\pi\varepsilon_0}\int \frac{dq}{r^2}\hat{r}$, choosing coordinates, and using symmetry to simplify are exactly the skills that question rewards. You will also be asked to sketch field behavior, compare field values at different points, and justify claims about direction using symmetry. ## Key Takeaways - The field of a continuous distribution comes from integrating $\vec{E}=\frac{1}{4\pi\varepsilon_0}\int \frac{dq}{r^2}\hat{r}$ over the charge. - Write $dq$ correctly for the geometry: $dq=\lambda\,dx$ for a line, $dq=\lambda R\,d\theta$ for an arc, $dq=\rho\,dV$ for a volume. - Use symmetry first. Identify which field components cancel before you set up the integral, so you only integrate the surviving component. - Know the in-scope results: infinite line gives $E=\lambda/(2\pi\varepsilon_0 r)$, ring on axis gives $E=\frac{1}{4\pi\varepsilon_0}\frac{Qx}{(R^2+x^2)^{3/2}}$. - Check limits and units. A finite line should reduce to the infinite-line result as $L\to\infty$, and far away a ring should look like a [point charge](/ap-physics-c-e-m/unit-8/1-electric-charge-and-electric-force/study-guide/vbxIAJB9gM4zK3F7 "fv-autolink"). - The field of an infinite line falls off as $1/r$, not $1/r^2$ like a point charge. ## Electric Field Integration For a continuous [charge distribution](/ap-physics-c-e-m/unit-8/2-electric-charge-and-the-process-of-charging/study-guide/BHGwEt4ppJ4UWC4x "fv-autolink"), you find the [electric field](/ap-physics-c-e-m/unit-10/1-electrostatics-with-conductors/study-guide/4Vb5LzwBQm2HSChq "fv-autolink") by integrating the contributions from infinitesimal charge elements. The fundamental equation is: $$\vec{E}=\frac{1}{4 \pi \varepsilon_{0}} \int \frac{dq}{r^{2}} \hat{r}$$ This adds up the field from each small piece of charge: - $\vec{E}$ is the resulting electric field vector - $\varepsilon_{0}$ is the [permittivity of free space](/ap-physics-c-e-m/unit-10/4-dielectrics/study-guide/94aiEgDjuJxhK3Px "fv-autolink") (8.85 × 10^-12 C²/N·m²) - $dq$ is an infinitesimal charge element within the distribution - $r$ is the distance from each charge element to the point where you calculate the field - $\hat{r}$ is the unit vector pointing from the charge element to the point of interest A reliable process: - Pick a coordinate system that matches the geometry of the charge distribution - Express the charge element $dq$ in terms of your chosen coordinates - Write the distance $r$ from each charge element to the point of interest - Set up the integral and solve, often using substitution The [principle of superposition](/ap-physics-c-e-m/unit-10/3-capacitors/study-guide/jGOEgdPDnNfNGUeR "fv-autolink") is what makes this work. The total electric field at any point is the vector sum of the fields from each individual charge or distribution: $$\vec{E}_{total} = \vec{E}_1 + \vec{E}_2 + \vec{E}_3 + ... + \vec{E}_n$$ ## Symmetry in Charge Distributions Symmetry can dramatically simplify these calculations. Recognizing it lets you predict the field's direction and avoid integrating components that cancel. For this topic, the most useful symmetry arguments are: - **[Cylindrical symmetry](/ap-physics-c-e-m/key-terms/cylindrical-symmetry "fv-autolink")** (infinite line or cylinder): The field points radially outward from the axis and depends only on the [perpendicular](/ap-physics-c-e-m/unit-12/2-magnetism-and-moving-charges/study-guide/aujVCr641dSEbfts "fv-autolink") distance from the axis. There is no component along the axis, so you only need one radial component. - **Axial symmetry** (ring on its axis): When the field point is on the axis of a ring, every charge element is the same distance from that point. Components perpendicular to the axis cancel in pairs, so only the axial component survives. - **Component cancellation** (arcs and finite line charges): For a semicircular arc at its center, charge elements on opposite sides produce components that cancel in one direction and add in the other. For a finite line charge on its perpendicular bisector, symmetry cancels the component along the rod. Spot which components cancel before integrating to save work. Spherical and planar symmetry matter elsewhere in electrostatics, but they connect to [Gauss's law](/ap-physics-c-e-m/unit-8/6-gausss-law/study-guide/HnTBd7Mh37yvO3cx "fv-autolink") in a later topic rather than to the direct [integration](/ap-physics-c-e-m/key-terms/integration "fv-autolink") in this one. Symmetry can also reveal locations where the field must be zero because contributions from different parts of the distribution cancel. > 🚫 **Boundary Statement** > > On the exam, you will only need to use calculus to find the electric field for specific charge distributions and locations: an infinitely long, uniformly charged wire or cylinder at a distance from its central axis, a thin ring of charge at a location along the axis of the ring, a semicircular arc or part of a semicircular arc at its center, and a finite wire or line charge at a point collinear with the line charge or at a location along its perpendicular bisector. ## How to Use This on the AP Physics C: E&M Exam ### Free Response The mathematical routines question often asks you to derive a field expression from scratch. Show every step: define your coordinate system, write $dq$ in your coordinates, state the distance $r$, identify which components cancel by symmetry, then integrate. Leave your answer symbolic unless asked for a number, and keep $\varepsilon_0$ or $k$ written out. ### Problem Solving - State the symmetry argument in words before integrating. Graders want to see why a component vanishes. - Match the charge element to the geometry: $dq=\lambda\,dx$, $dq=\lambda R\,d\theta$, $dq=\sigma\,dA$, or $dq=\rho\,dV$. - Pull constants outside the integral and integrate only the part that depends on your variable. - Check limiting behavior. Far from a ring it should look like a point charge; a finite line should approach $\lambda/(2\pi\varepsilon_0 r)$ as it gets very long. ### Common Trap Do not treat the infinite line like a point charge. Its field goes as $1/r$, not $1/r^2$. Also, do not forget the $\cos\theta$ or $x/r$ factor that projects $dE$ onto the surviving direction. ## Practice Problem 1: Electric Field of a Ring of Charge > A thin ring of radius R carries a uniform charge Q. Find the electric field at a point P located on the axis of the ring at a distance x from the center of the ring. **Solution** 1. Place the ring in the xy-plane centered at the origin, with point P at (0, 0, x). 2. By symmetry, the field on the axis only has a component along the x-axis. The perpendicular components from charge elements on opposite sides of the ring cancel. 3. Consider a small element with charge $dq$. Since the charge is uniformly distributed: $$dq = \frac{Q}{2\pi R}\,R\,d\theta = \frac{Q}{2\pi}\,d\theta$$ 4. The distance from this element to point P is the same for every element: $$r = \sqrt{R^2 + x^2}$$ 5. The axial component of the field from this element is the magnitude times the projection factor $x/r$: $$dE_x = \frac{1}{4\pi\varepsilon_0}\frac{dq}{r^2}\cdot\frac{x}{r}$$ 6. Substituting $dq$ and $r$: $$dE_x = \frac{1}{4\pi\varepsilon_0}\frac{Q}{2\pi}\,d\theta \cdot \frac{x}{(R^2 + x^2)^{3/2}}$$ 7. Everything except $d\theta$ is constant, so integrate $\theta$ from 0 to $2\pi$: $$E_x = \frac{1}{4\pi\varepsilon_0} \frac{Qx}{2\pi (R^2+x^2)^{3/2}} \int_0^{2\pi} d\theta = \frac{1}{4\pi\varepsilon_0} \frac{Qx}{2\pi (R^2+x^2)^{3/2}} (2\pi)$$ 8. The factors of $2\pi$ cancel: $$E = \frac{1}{4\pi\varepsilon_0}\frac{Qx}{(R^2+x^2)^{3/2}}$$ For positive $Q$, this points along the axis away from the ring on the side where $x > 0$. Notice that for $x \gg R$, the field approaches $\frac{1}{4\pi\varepsilon_0}\frac{Q}{x^2}$, the point-charge result, which is a good check. ## Practice Problem 2: Electric Field of an Infinite Line Charge > An infinitely long line carries a uniform linear charge density λ. Find the electric field at a distance r from the line. **Solution** 1. By cylindrical symmetry, the field points radially outward from the line (for positive $\lambda$) and its magnitude depends only on the distance $r$. 2. Place the line along the z-axis and find the field at point P at $(r, 0, 0)$. 3. Consider a small element $dz$ with charge $dq = \lambda\,dz$. 4. The distance from this element to P is: $$s = \sqrt{r^2 + z^2}$$ 5. The field from each element has components along x and z, but the z-components from elements at $+z$ and $-z$ cancel. 6. The surviving x-component from each element uses the projection factor $r/s$: $$dE_x = \frac{1}{4\pi\varepsilon_0}\frac{\lambda\,dz}{s^2}\cdot\frac{r}{s} = \frac{\lambda r}{4\pi\varepsilon_0}\frac{dz}{(r^2 + z^2)^{3/2}}$$ 7. Integrate over the whole line, $z$ from $-\infty$ to $+\infty$: $$E_x = \frac{\lambda r}{4\pi\varepsilon_0}\int_{-\infty}^{\infty}\frac{dz}{(r^2 + z^2)^{3/2}}$$ 8. Using $\int_{-\infty}^{\infty}\frac{dz}{(r^2+z^2)^{3/2}} = \frac{2}{r^2}$: $$E_x = \frac{\lambda r}{4\pi\varepsilon_0}\cdot\frac{2}{r^2} = \frac{\lambda}{2\pi\varepsilon_0 r}$$ So the field at distance $r$ from an infinite line charge is: $$E = \frac{\lambda}{2\pi\varepsilon_0 r}$$ This field decreases as $1/r$, unlike the $1/r^2$ dependence for [point charges](/ap-physics-c-e-m/key-terms/point-charges "fv-autolink"). ## Practice Problem 3: Electric Field of a Uniformly Charged Cylinder > A long, uniformly charged solid cylinder of radius $a$ has volume charge density $\rho$. Find the electric field at a distance $r > a$ from the central axis. **Solution** Because the cylinder is infinitely long and uniformly charged, the field outside is radial and depends only on the distance $r$ from the axis. Build the solid cylinder out of thin cylindrical shells of radius $s$ and thickness $ds$, where $0 \le s \le a$. In a length $L$, each shell has charge $dQ = \rho(2\pi s L\,ds)$, so its [linear charge density](/ap-physics-c-e-m/key-terms/linear-charge-density "fv-autolink") is $d\lambda = dQ/L = 2\pi\rho s\,ds$. Outside an infinite cylindrical shell, the field is the same as that of an infinite line charge with linear density $d\lambda$ on the axis, which you found in Practice Problem 2. So one shell contributes: $$dE = \frac{d\lambda}{2\pi\varepsilon_0 r} = \frac{2\pi\rho s\,ds}{2\pi\varepsilon_0 r} = \frac{\rho s}{\varepsilon_0 r}\,ds$$ Integrate over all shells from $s = 0$ to $s = a$: $$E = \int_0^a \frac{\rho s}{\varepsilon_0 r}\,ds = \frac{\rho}{\varepsilon_0 r}\left[\frac{s^2}{2}\right]_0^a = \frac{\rho a^2}{2\varepsilon_0 r}$$ So for $r > a$: $$\boxed{E = \frac{\rho a^2}{2\varepsilon_0 r}}$$ pointing radially outward for positive charge density. This matches the infinite line form: the cylinder's total linear charge density is $\lambda = \rho \pi a^2$, and substituting gives $E = \lambda / (2\pi\varepsilon_0 r)$, confirming consistency. ## Practice Problem 4: Electric Field of a Semicircular Arc at Its Center > A thin semicircular arc of radius $R$ carries a uniform total charge $Q$. Find the electric field at the center of the semicircle. **Solution** For a charged arc centered at the field point, every charge element is the same distance $R$ from the center, which simplifies the integral. 1. Place the semicircle so it spans from $\theta = -\pi/2$ to $\theta = +\pi/2$ (opening to the right), with the center at the origin. 2. The linear charge density is $\lambda = Q/(\pi R)$, and a small element subtends angle $d\theta$: $$dq = \lambda R\,d\theta = \frac{Q}{\pi}\,d\theta$$ 3. Each element is at distance $R$ from the center, so the magnitude of its field contribution is: $$dE = \frac{1}{4\pi\varepsilon_0}\frac{dq}{R^2} = \frac{1}{4\pi\varepsilon_0}\frac{Q}{\pi R^2}\,d\theta$$ 4. Resolve $dE$ into components. The element at angle $\theta$ produces: - $dE_x = dE\cos\theta$ - $dE_y = dE\sin\theta$ 5. By symmetry, the $y$-components from elements at $+\theta$ and $-\theta$ cancel, so $E_y = 0$. 6. The $x$-component adds constructively: $$E_x = \int_{-\pi/2}^{\pi/2} \frac{Q}{4\pi^2\varepsilon_0 R^2}\cos\theta\,d\theta = \frac{Q}{4\pi^2\varepsilon_0 R^2}\left[\sin\theta\right]_{-\pi/2}^{\pi/2} = \frac{Q}{4\pi^2\varepsilon_0 R^2}(2)$$ 7. The field at the center is: $$\boxed{E = \frac{Q}{2\pi^2\varepsilon_0 R^2}}$$ directed along the axis of symmetry, pointing from the arc toward the center (away from the charge for positive $Q$). ### What About Part of a Semicircular Arc? For an arc that is only *part* of a semicircle (spanning from $\theta_1$ to $\theta_2$ instead of the full $-\pi/2$ to $+\pi/2$), the same method applies but the symmetry argument changes. Each element still contributes $dE = \frac{1}{4\pi\varepsilon_0}\frac{dq}{R^2}$, and you still resolve into components. Because the arc is no longer symmetric, *both* the $x$- and $y$-components may survive. Integrate $dE_x = dE\cos\theta$ and $dE_y = dE\sin\theta$ over the actual limits $\theta_1$ to $\theta_2$ to find the net magnitude and direction. The idea stays the same: figure out which components cancel, if any, before integrating. ## Practice Problem 5: Electric Field of a Finite Line Charge Two important cases come up for a finite line charge: a point on its perpendicular bisector and a point collinear with the line. ### Case A: Point on the Perpendicular Bisector > A thin rod of length $L$ carries uniform linear charge density $\lambda$. Find the electric field at a point P located a distance $d$ from the center of the rod along its perpendicular bisector. **Solution** 1. Place the rod along the $x$-axis from $x = -L/2$ to $x = +L/2$, with point P at $(0, d, 0)$. 2. A small element $dx$ at position $x$ has charge $dq = \lambda\,dx$. Its distance to P is: $$r = \sqrt{x^2 + d^2}$$ 3. The field from this element has magnitude: $$dE = \frac{1}{4\pi\varepsilon_0}\frac{\lambda\,dx}{x^2 + d^2}$$ 4. By symmetry, the $x$-components from elements at $+x$ and $-x$ cancel. Only the $y$-component survives, using the projection factor $d/r$: $$dE_y = dE \cdot \frac{d}{r} = \frac{\lambda\,d}{4\pi\varepsilon_0}\frac{dx}{(x^2+d^2)^{3/2}}$$ 5. Integrate from $x = -L/2$ to $x = +L/2$: $$E_y = \frac{\lambda d}{4\pi\varepsilon_0}\int_{-L/2}^{L/2}\frac{dx}{(x^2+d^2)^{3/2}}$$ 6. Using the standard integral $\int \frac{dx}{(x^2+a^2)^{3/2}} = \frac{x}{a^2\sqrt{x^2+a^2}}$: $$E_y = \frac{\lambda d}{4\pi\varepsilon_0}\cdot\frac{1}{d^2}\cdot\frac{2(L/2)}{\sqrt{(L/2)^2+d^2}}$$ 7. Simplifying: $$\boxed{E = \frac{\lambda L}{4\pi\varepsilon_0\,d\sqrt{(L/2)^2 + d^2}}}$$ directed perpendicular to the rod, pointing away from it for positive $\lambda$. As $L \to \infty$, this reduces to $E = \lambda/(2\pi\varepsilon_0 d)$, recovering the infinite line charge result. ### Case B: Point Collinear with the Line Charge > A thin rod of length $L$ carries uniform linear charge density $\lambda$. Find the electric field at a point P located a distance $a$ from one end of the rod, along the line of the rod. **Solution** 1. Place the rod along the $x$-axis from $x = 0$ to $x = L$, with point P at $x = L + a$. 2. A small element $dx$ at position $x$ has charge $dq = \lambda\,dx$. Its distance to P is: $$r = (L + a) - x$$ 3. Every element's field points in the same direction (the $+x$ direction for positive $\lambda$), so nothing cancels and you integrate the full magnitude: $$E = \frac{1}{4\pi\varepsilon_0}\int_0^L \frac{\lambda\,dx}{(L+a-x)^2}$$ 4. Substitute $u = L + a - x$, so $du = -dx$: $$E = \frac{\lambda}{4\pi\varepsilon_0}\int_a^{L+a}\frac{du}{u^2} = \frac{\lambda}{4\pi\varepsilon_0}\left[-\frac{1}{u}\right]_a^{L+a} = \frac{\lambda}{4\pi\varepsilon_0}\left(\frac{1}{a} - \frac{1}{L+a}\right)$$ 5. Simplifying: $$\boxed{E = \frac{\lambda L}{4\pi\varepsilon_0\,a(L+a)}}$$ directed along the line of the rod, pointing away from the rod for positive $\lambda$. For this collinear case there is no symmetry cancellation, since every element's contribution points the same way. ## Common Misconceptions - **Treating an infinite line like a point charge.** The infinite line field is $E=\lambda/(2\pi\varepsilon_0 r)$ and falls off as $1/r$, not $1/r^2$. Only point charges and far-field distributions go as $1/r^2$. - **Forgetting the projection factor.** When only one component survives, you must multiply $dE$ by $\cos\theta$, $x/r$, or $d/r$ to keep just that component. Integrating the full magnitude overcounts the field. - **Assuming all components always cancel.** Cancellation only happens when the geometry is symmetric about the field point. A partial arc or an off-center point can leave more than one component nonzero. - **Pulling the wrong thing out of the integral.** The distance $r$ and angle change as you move along most distributions, so they stay inside the integral. For a ring on its axis, $r$ is constant, which is why that integral is easy. - **Mixing up the charge element.** Use $dq=\lambda\,dx$ for a straight line, $dq=\lambda R\,d\theta$ for an arc, and $dq=\rho\,dV$ for a volume. Plugging in the wrong $dq$ leads to wrong units. - **Thinking the cylinder result comes straight from one integral of $dq/r^2$.** The outside-cylinder field here is built by stacking shells that each behave like an infinite line, not by a single direct application of $\int dq/r^2 \hat{r}$. ## Related AP Physics C: E&M Guides - [8.1 Electric Charge and Electric Force](/ap-physics-c-e-m/unit-8/1-electric-charge-and-electric-force/study-guide/vbxIAJB9gM4zK3F7) - [8.2 Electric Charge and the Process of Charging](/ap-physics-c-e-m/unit-8/2-electric-charge-and-the-process-of-charging/study-guide/BHGwEt4ppJ4UWC4x) - [8.3 Electric Fields](/ap-physics-c-e-m/unit-8/3-electric-fields/study-guide/7Nyjo6HcMeSSkleV) - [8.6 Gauss's Law](/ap-physics-c-e-m/unit-8/6-gausss-law/study-guide/HnTBd7Mh37yvO3cx) - [8.5 Electric Flux](/ap-physics-c-e-m/unit-8/5-electric-flux/study-guide/6QIhVeHG0bYi6lTH) ## Vocabulary - **charge distribution**: The spatial arrangement and density of electric charge in a region of space. - **electric field**: A vector field that represents the force per unit charge exerted on a test charge at any point in space due to a charge distribution. - **integration**: A calculus method used to sum infinitesimal contributions to find the total electric field from a continuous charge distribution. - **principle of superposition**: The principle that the total electric field is the vector sum of fields produced by individual charges. - **symmetry**: A property of charge distributions that allows simplification of electric field calculations by reducing the number of field components that need to be evaluated. ## FAQs ### What is an electric field of a charge distribution? It is the net electric field created by a continuous spread of charge, found by adding the small field contributions from many charge elements. ### What does dq mean in electric field integrals? dq is an infinitesimal piece of charge. You rewrite it using charge density, such as lambda dx for a line or lambda R dtheta for an arc. ### Why is symmetry important for charge distributions? Symmetry tells you which field components cancel and which direction the net field points, so you can set up a simpler integral. ### Which charge distributions are in scope for AP Physics C: E&M? The course focuses on cases like infinite lines or cylinders, rings on an axis, semicircular arcs at the center, and finite line charges on an axis or perpendicular bisector. ### How is an infinite line field different from a point charge field? An infinite line field decreases as 1 over r, while a point charge field decreases as 1 over r squared. ### How should I show work for electric field derivations on the AP exam? Define coordinates, write dq, state the distance, use symmetry to cancel components, set up the surviving integral, and check units or limiting behavior. ## Structured Data ```json {"@context":"https://schema.org","@type":"FAQPage","inLanguage":"en","mainEntity":[{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#what-is-an-electric-field-of-a-charge-distribution","name":"What is an electric field of a charge distribution?","acceptedAnswer":{"@type":"Answer","text":"It is the net electric field created by a continuous spread of charge, found by adding the small field contributions from many charge elements."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#what-does-dq-mean-in-electric-field-integrals","name":"What does dq mean in electric field integrals?","acceptedAnswer":{"@type":"Answer","text":"dq is an infinitesimal piece of charge. You rewrite it using charge density, such as lambda dx for a line or lambda R dtheta for an arc."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#why-is-symmetry-important-for-charge-distributions","name":"Why is symmetry important for charge distributions?","acceptedAnswer":{"@type":"Answer","text":"Symmetry tells you which field components cancel and which direction the net field points, so you can set up a simpler integral."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#which-charge-distributions-are-in-scope-for-ap-physics-c-e-and-m","name":"Which charge distributions are in scope for AP Physics C: E&M?","acceptedAnswer":{"@type":"Answer","text":"The course focuses on cases like infinite lines or cylinders, rings on an axis, semicircular arcs at the center, and finite line charges on an axis or perpendicular bisector."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#how-is-an-infinite-line-field-different-from-a-point-charge-field","name":"How is an infinite line field different from a point charge field?","acceptedAnswer":{"@type":"Answer","text":"An infinite line field decreases as 1 over r, while a point charge field decreases as 1 over r squared."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-c-e-m/unit-8/4-electric-fields-of-charge-distributions/study-guide/VN5rKJGMCCkWC0kM#how-should-i-show-work-for-electric-field-derivations-on-the-ap-exam","name":"How should I show work for electric field derivations on the AP exam?","acceptedAnswer":{"@type":"Answer","text":"Define coordinates, write dq, state the distance, use symmetry to cancel components, set up the surviving integral, and check units or limiting behavior."}}]} ```