---
title: "AP Physics 2 9.5: Specific Heat and Thermal Conductivity"
description: "Review AP Physics 2 Topic 9.5, including specific heat capacity, Q = mc delta T, specific heat capacity of aluminum, thermal conductivity formula, rate of heat flow, conduction through stationary objects, and thermal conductivity practice problems."
canonical: "https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm"
type: "study-guide"
subject: "AP Physics 2"
unit: "Unit 9 – Thermodynamics"
lastUpdated: "2026-06-09"
---

# AP Physics 2 9.5: Specific Heat and Thermal Conductivity

## Summary

Review AP Physics 2 Topic 9.5, including specific heat capacity, Q = mc delta T, specific heat capacity of aluminum, thermal conductivity formula, rate of heat flow, conduction through stationary objects, and thermal conductivity practice problems.

## Guide

Specific heat tells you how much [energy](/ap-physics-2-revised/unit-15/6-compton-scattering/study-guide/OoE2k26dtiHSsZEf "fv-autolink") it takes to change a material's temperature, found with $Q = mc\Delta T$. [Thermal conductivity](/ap-physics-2-revised/key-terms/thermal-conductivity "fv-autolink") tells you how fast heat flows through a material by conduction, found with $\frac{Q}{\Delta t} = \frac{kA\Delta T}{L}$.

## Why This Matters for the AP Physics 2 Exam

This topic gives you two tools that connect [energy transfer](/ap-physics-2-revised/unit-11/4-electric-power/study-guide/XlqNl6VwuwtsWe2m "fv-autolink") to real materials. You will use $Q = mc\Delta T$ in calorimetry-style problems where energy moves between objects until they reach the same temperature, which ties back to [thermal equilibrium](/ap-physics-2-revised/key-terms/thermal-equilibrium "fv-autolink") ideas. The conduction rate equation shows up when you compare how fast heat moves through different materials, thicknesses, or areas.

[Thermodynamics](/ap-physics-2-revised/unit-9 "fv-autolink") carries real weight on the exam, and this content supports both calculation questions and explanation questions. Because the free-response section can ask you to translate between words, math, and reasoning, you should be ready to explain why a material with high specific heat resists temperature change, or why a thick [insulator](/ap-physics-2-revised/unit-10/1-electric-charge-and-electric-force/study-guide/E6OYkOGeroCXwgw1 "fv-autolink") slows heat flow, not just plug numbers into a formula.

## Key Takeaways

- Use $Q = mc\Delta T$ to relate heat added or removed to a temperature change. Mass and specific heat both affect how much the temperature shifts.
- Specific heat $c$ is an intrinsic property set by how a material's atoms are arranged and bonded. Water's high specific heat means it resists temperature change.
- Use $\frac{Q}{\Delta t} = \frac{kA\Delta T}{L}$ to find the rate of conduction. Heat flows faster with higher conductivity, larger area, bigger [temperature difference](/ap-physics-2-revised/key-terms/temperature-difference "fv-autolink"), or thinner material.
- Thermal conductivity $k$ is also intrinsic. Metals conduct well, [insulators](/ap-physics-2-revised/key-terms/insulators "fv-autolink") conduct poorly.
- Watch units: $c$ is in J/(kg·°C) or J/(kg·K), and $k$ is in W/(m·°C) or W/(m·K). Temperature differences are the same in °C and K.
- On the AP exam, specific heat is modeled as independent of temperature.

## Specific Heat and Energy Required to Change Temperature

Specific heat tells you how much energy is needed to change an object's temperature. It varies widely between materials, which explains why some substances heat up quickly while others take much longer.

When [thermal energy](/ap-physics-2-revised/unit-11/3-resistance-resistivity-and-ohms-law/study-guide/y0ZmKqhOPqeLWZFa "fv-autolink") is added to or removed from an object, its temperature changes according to:

$$Q = mc\Delta T$$

Where:
- $Q$ = heat energy transferred (J)
- $m$ = mass of the object (kg)
- $c$ = specific heat of the material (J/kg·°C)
- $\Delta T$ = change in temperature (°C)

This relationship works both ways. You can find how much energy is needed to produce a temperature change, or how much the temperature changes when a known amount of energy is added.

Specific heat is an intrinsic property, meaning it depends on the material itself, not on how much of it you have:
- Water has an exceptionally high specific heat (about 4,186 J/kg·°C), so it takes a lot of energy to heat water.
- Metals like aluminum (about 900 J/kg·°C) and copper (about 385 J/kg·°C) have lower specific heats, so they heat up more quickly.
- A material's specific heat comes from how its atoms are arranged and how they interact.

> **Boundary Statement**
>
> On the AP Physics 2 exam, specific heat is modeled as independent of temperature.

## Thermal Conductivity and Rate of Energy Transfer

Thermal conductivity measures how efficiently a material transfers heat by conduction. When there is a temperature difference across a material, energy flows from the hotter side to the cooler side at a rate set by several factors.

The rate of [heat transfer](/ap-physics-2-revised/key-terms/heat-transfer "fv-autolink") through conduction is:

$$\frac{Q}{\Delta t} = \frac{kA\Delta T}{L}$$

Where:
- $\frac{Q}{\Delta t}$ = rate of heat transfer (W or J/s)
- $k$ = thermal conductivity (W/m·°C)
- $A$ = [cross-sectional area](/ap-physics-2-revised/key-terms/cross-sectional-area "fv-autolink") (m²)
- $\Delta T$ = temperature difference across the material (°C)
- $L$ = thickness of the material (m)

This equation shows that heat transfers faster when:
- The material has higher thermal conductivity
- The cross-sectional area is larger
- The temperature difference is greater
- The material is thinner

Thermal conductivity varies a lot between materials:
- Metals are excellent [conductors](/ap-physics-2-revised/key-terms/conductors "fv-autolink") with high values (copper: about 401 W/m·°C, aluminum: about 205 W/m·°C).
- Insulators have very low thermal conductivity (wood: about 0.12 W/m·°C, fiberglass: about 0.04 W/m·°C).

This is why a metal surface feels colder to the touch than wood at the same temperature. The metal conducts heat away from your hand quickly. Like specific heat, thermal conductivity is an intrinsic property set by the material's atomic structure and how its atoms and [electrons](/ap-physics-2-revised/key-terms/electrons "fv-autolink") interact.

## How to Use This on the AP Physics 2 Exam

### Problem Solving

- For $Q = mc\Delta T$ problems, identify which quantity is unknown before plugging in. Keep mass in kg and watch your sign: $Q$ is positive when energy is added and the temperature rises.
- For calorimetry, energy lost by the hotter object equals energy gained by the cooler object when no heat escapes. Set the total heat to zero or set heat gained equal to heat lost.
- For conduction, make sure $L$ is the thickness along the direction heat travels and $A$ is the cross-sectional area [perpendicular](/ap-physics-2-revised/unit-12/2-magnetism-and-moving-charges/study-guide/EquvYgnfwi2ptpX5 "fv-autolink") to that flow.

### Free Response

- Be ready to explain results in words. For example, justify why doubling the thickness of an insulator cuts the conduction rate in half, using the equation as evidence.
- When a question asks for reasoning, connect the equation to the physical property. A high specific heat means more energy per degree of change. A high thermal conductivity means faster energy flow.

### Common Trap

- Do not confuse specific heat with thermal conductivity. Specific heat is about how much energy changes temperature; conductivity is about how fast energy moves through a material.

## Practice Problem 1: Specific Heat

> A 2.0 kg aluminum pot (specific heat = 900 J/kg·°C) contains 0.5 kg of water (specific heat = 4,186 J/kg·°C). If 84,000 J of heat energy is added to this system, and both the pot and water start at 20°C, what will be the final temperature of the system? Assume no heat is lost to the surroundings.

**Solution**

Use $Q = mc\Delta T$ for both the aluminum pot and the water. They share the same temperature change.

$$Q_{total} = Q_{aluminum} + Q_{water}$$
$$84,000 \text{ J} = m_{al}c_{al}\Delta T + m_{water}c_{water}\Delta T$$
$$84,000 \text{ J} = (2.0 \text{ kg})(900 \text{ J/kg} \cdot \text{°C})\Delta T + (0.5 \text{ kg})(4,186 \text{ J/kg} \cdot \text{°C})\Delta T$$
$$84,000 \text{ J} = (1,800 \text{ J/°C} + 2,093 \text{ J/°C})\Delta T$$
$$84,000 \text{ J} = 3,893 \text{ J/°C} \times \Delta T$$
$$\Delta T = \frac{84,000 \text{ J}}{3,893 \text{ J/°C}} = 21.6°\text{C}$$

The final temperature is $20°\text{C} + 21.6°\text{C} = 41.6°\text{C}$.

## Practice Problem 2: Thermal Conductivity

> A window in a house has dimensions of 1.5 m × 2.0 m and is made of glass with a thickness of 0.006 m. The thermal conductivity of glass is 0.8 W/m·°C. If the temperature inside the house is 22°C and the outside temperature is -5°C, what is the rate of heat loss through the window?

**Solution**

Use the conduction rate equation:

$$\frac{Q}{\Delta t} = \frac{kA\Delta T}{L}$$

Where:
- $k = 0.8 \text{ W/m} \cdot \text{°C}$ (thermal conductivity of glass)
- $A = 1.5 \text{ m} \times 2.0 \text{ m} = 3.0 \text{ m}^2$ (area of the window)
- $\Delta T = 22°\text{C} - (-5°\text{C}) = 27°\text{C}$ (temperature difference)
- $L = 0.006 \text{ m}$ (thickness of the glass)

Substituting:

$$\frac{Q}{\Delta t} = \frac{(0.8 \text{ W/m} \cdot \text{°C})(3.0 \text{ m}^2)(27°\text{C})}{0.006 \text{ m}}$$
$$\frac{Q}{\Delta t} = \frac{64.8 \text{ W·m}}{0.006 \text{ m}} = 10,800 \text{ W}$$

The rate of heat loss through the window is 10,800 watts, or 10.8 kilowatts.

## Common Misconceptions

- "Specific heat and thermal conductivity are the same thing." They are different. Specific heat is the energy needed to change temperature; thermal conductivity is how fast heat moves through a material by conduction.
- "A material that feels cold is actually colder." A metal feels colder than wood at the same temperature because its high conductivity pulls heat from your hand faster. The feeling tracks heat flow, not temperature.
- "Bigger objects always have higher specific heat." Specific heat is per kilogram and does not depend on size. A larger mass needs more total energy, but $c$ itself stays the same for that material.
- "Thicker materials conduct heat faster." It is the opposite. Greater thickness $L$ is in the denominator, so a thicker material slows the conduction rate.
- "Temperature difference must be converted to kelvin." A temperature difference in °C equals the same difference in K, so $\Delta T$ has the same value either way in these equations.
- "Heat flows from cold to hot if you wait long enough." Energy spontaneously flows from higher temperature to lower temperature until both reach the same temperature.

## Related AP Physics 2 Guides

- [9.1 Kinetic Theory of Temperature and Pressure](/ap-physics-2-revised/unit-9/1-kinetic-theory-of-temperature-and-pressure/study-guide/wWjb2NGJDLNmMhB3)
- [9.2 The Ideal Gas Law](/ap-physics-2-revised/unit-9/2-the-ideal-gas-law/study-guide/Nw3xH5qnLmpzH8F0)
- [9.3 Thermal Energy Transfer and Equilibrium](/ap-physics-2-revised/unit-9/3-thermal-energy-transfer-and-equilibrium/study-guide/B2UC1jOK2bqVTMMH)
- [9.6 Entropy and the Second Law of Thermodynamics](/ap-physics-2-revised/unit-9/6-entropy-and-the-second-law-of-thermodynamics/study-guide/sddxT6j4BT0uuqO5)
- [9.4 The First Law of Thermodynamics](/ap-physics-2-revised/unit-9/4-the-first-law-of-thermodynamics/study-guide/MDiIPIbllDYW1klR)

## Vocabulary

- **conduction**: A thermal process by which energy is transferred between systems or within a system through direct contact without bulk motion of material.
- **intrinsic property**: A characteristic of a material that is independent of the amount of material present and depends on the arrangement and interactions of its atoms.
- **rate of energy transfer**: The amount of thermal energy transferred per unit time, measured in watts or joules per second.
- **specific heat**: An intrinsic property of a material that quantifies the amount of energy required to change the temperature of a unit mass of that material by one degree.
- **temperature change**: The difference in temperature of an object, represented as ΔT, which is directly related to the energy required to heat or cool the object.
- **temperature difference**: The difference in thermal energy between two systems that drives the spontaneous transfer of energy from the higher-temperature system to the lower-temperature system.
- **thermal conductivity**: An intrinsic property of a material that describes how readily heat energy is transferred through it by conduction.

## FAQs

### What is specific heat capacity?

Specific heat capacity is the energy required to raise one kilogram of a material by one degree Celsius or one kelvin. In AP Physics 2, use Q = mc Delta T.

### What is the thermal conductivity formula?

The conduction rate is Q / Delta t = kA Delta T / L, where k is thermal conductivity, A is area, Delta T is temperature difference, and L is thickness.

### How do you solve Q = mc Delta T problems?

Identify mass, specific heat, and temperature change, keep units consistent, then solve for the unknown energy or temperature change.

### What increases the rate of heat flow by conduction?

Heat flows faster with higher thermal conductivity, larger area, larger temperature difference, or smaller thickness.

### What is the difference between specific heat and thermal conductivity?

Specific heat tells how much energy changes a material's temperature. Thermal conductivity tells how quickly energy transfers through a material by conduction.

### Does AP Physics 2 treat specific heat as temperature dependent?

No. The AP Physics 2 CED says specific heat is modeled as independent of temperature.

## Structured Data

```json
{"@context":"https://schema.org","@type":"FAQPage","inLanguage":"en","mainEntity":[{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#what-is-specific-heat-capacity","name":"What is specific heat capacity?","acceptedAnswer":{"@type":"Answer","text":"Specific heat capacity is the energy required to raise one kilogram of a material by one degree Celsius or one kelvin. In AP Physics 2, use Q = mc Delta T."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#what-is-the-thermal-conductivity-formula","name":"What is the thermal conductivity formula?","acceptedAnswer":{"@type":"Answer","text":"The conduction rate is Q / Delta t = kA Delta T / L, where k is thermal conductivity, A is area, Delta T is temperature difference, and L is thickness."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#how-do-you-solve-q-mc-delta-t-problems","name":"How do you solve Q = mc Delta T problems?","acceptedAnswer":{"@type":"Answer","text":"Identify mass, specific heat, and temperature change, keep units consistent, then solve for the unknown energy or temperature change."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#what-increases-the-rate-of-heat-flow-by-conduction","name":"What increases the rate of heat flow by conduction?","acceptedAnswer":{"@type":"Answer","text":"Heat flows faster with higher thermal conductivity, larger area, larger temperature difference, or smaller thickness."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#what-is-the-difference-between-specific-heat-and-thermal-conductivity","name":"What is the difference between specific heat and thermal conductivity?","acceptedAnswer":{"@type":"Answer","text":"Specific heat tells how much energy changes a material's temperature. Thermal conductivity tells how quickly energy transfers through a material by conduction."}},{"@type":"Question","@id":"https://fiveable.me/ap-physics-2-revised/unit-9/5-specific-heat-and-thermal-conductivity/study-guide/VTemzlLtvNgPkUnm#does-ap-physics-2-treat-specific-heat-as-temperature-dependent","name":"Does AP Physics 2 treat specific heat as temperature dependent?","acceptedAnswer":{"@type":"Answer","text":"No. The AP Physics 2 CED says specific heat is modeled as independent of temperature."}}]}
```