--- title: "Half-Life — AP Chemistry Definition & Exam Guide" description: "Half-life is the time for a reactant's concentration to drop by half. For first-order reactions it's constant and equals 0.693/k, a core AP Chem Unit 5 skill." canonical: "https://fiveable.me/ap-chem/key-terms/half-life" type: "key-term" subject: "AP Chemistry" unit: "Unit 5" --- # Half-Life — AP Chemistry Definition & Exam Guide ## Definition Half-life (t½) is the time required for the concentration of a reactant to fall to half its initial value; in AP Chem Unit 5, a constant half-life signals a first-order reaction, where t½ = 0.693/k regardless of how much reactant you start with. ## What It Is Half-life is the time it takes for half of a reactant to be used up. Most people first meet it with [radioactive decay](/ap-chem/key-terms/radioactive-decay "fv-autolink") (the time for half a radioactive sample to disintegrate), but in [AP Chem](/ap-chem "fv-autolink") it's really a kinetics concept. Radioactive decay just happens to follow first-order kinetics, which is why every isotope has one fixed half-life. Here's the part the exam cares about. For a **first-order reaction**, half-life is constant. Whether you start with 0.800 M or 0.008 M, it takes the same amount of time to cut the [concentration](/ap-chem/unit-3/beer-lambert-law/study-guide/smCHzraorVz6qlWW1oeB "fv-autolink") in half, and the formula is t½ = 0.693/k (that 0.693 is ln 2, and the equation is on your AP formula sheet). For zeroth- and second-order reactions, half-life changes as the reaction runs. A second-order half-life actually depends on the initial concentration, getting *longer* as the reactant runs out. So a constant half-life isn't just a number you calculate. It's evidence you can use to argue a reaction is first order. ## Why It Matters Half-life lives in [Unit 5](/ap-chem/unit-5 "fv-autolink") (Kinetics), specifically Topic 5.3, Concentration Changes Over Time. It supports learning objective 5.3.A, which asks you to identify a reaction's rate law from concentration-versus-time data. Per the essential knowledge (5.3.A.2), a [first-order reaction](/ap-chem/key-terms/first-order-reaction "fv-autolink") gives a linear plot of ln[A] versus time, and the constant-half-life behavior is the other fingerprint of first order you can spot straight from a data table. If [A] goes 0.400 → 0.200 → 0.100 in equal time chunks, you know the order without graphing anything. Half-life also connects to Topic 5.4 (Elementary Reactions), since a unimolecular [elementary step](/ap-chem/key-terms/elementary-step "fv-autolink") is automatically first order, the exact case where half-life math applies cleanly. On the exam, half-life is one of the fastest ways to get from raw data to k, or from k to a concentration at some later time. ## Connections ### [First-Order Reaction (Unit 5)](/ap-chem/key-terms/first-order-reaction) This is the closest partner concept. A constant half-life IS the definition-level fingerprint of first order. If equal time intervals keep cutting [A] in half, the reaction is first order, full stop. ### [Integrated Rate Law (Unit 5)](/ap-chem/key-terms/integrated-rate-law) The half-life formula isn't separate magic. Plug [A] = ½[A]₀ into the first-order [integrated rate law](/ap-chem/key-terms/integrated-rate-law "fv-autolink") ln[A] = ln[A]₀ − kt and t½ = 0.693/k falls right out. Knowing that derivation means you never have to memorize blindly. ### [Rate Constant (Unit 5)](/ap-chem/key-terms/rate-constant) Half-life and k are two ways of saying the same thing about a first-order reaction. Big k means fast reaction means short half-life. The exam loves making you convert one into the other. ### [Radioactive Decay (Unit 5 application)](/ap-chem/key-terms/radioactive-decay) Nuclear decay is the universe's cleanest first-order process. That's why an [isotope](/ap-chem/key-terms/isotope "fv-autolink")'s half-life is a fixed property, like 15.0 days, no matter how big the sample is. AP questions use decay as a real-world setting for first-order math. ## On the AP Exam Half-life shows up in multiple-choice and FRQ kinetics problems in a few predictable flavors. First, the calculation type. Given k = 0.231 s⁻¹ and [A]₀ = 0.800 M, find the concentration after two half-lives (just halve twice, getting 0.200 M). Second, the data-table type. You're given times and concentrations, like 0.400 M dropping to 0.200 M in 20 minutes, and you read off the half-life and conclude the reaction is first order. Third, the radioactive decay type. An isotope with a 15.0-day half-life starts at 8.00 g, and after 45.0 days (three half-lives) only 1.00 g remains. Fourth, the conceptual type, asking what a second-order half-life depends on (answer: the initial concentration, unlike first order). For full credit on FRQs, show the relationship t½ = 0.693/k explicitly and state your reasoning when you use constant half-life as evidence of reaction order. ## Half-Life vs Rate constant (k) The rate constant k tells you how fast a reaction goes per unit of concentration; half-life tells you how long it takes for half the reactant to disappear. For first-order reactions they're linked by t½ = 0.693/k, so they're inversely related. A larger k always means a shorter half-life. They also have different units, since k for a first-order reaction has units of s⁻¹ while half-life is just time. ## Key Takeaways - Half-life is the time required for a reactant's concentration to drop to half its starting value. - For a first-order reaction, half-life is constant and equals 0.693/k, no matter what the initial concentration is. - A constant half-life in a data table is proof of first-order kinetics, just like a linear ln[A] vs. time plot. - For a second-order reaction, half-life depends on the initial concentration and gets longer as the reaction proceeds. - After n half-lives, the amount remaining is the original amount divided by 2ⁿ, so three half-lives leaves one-eighth of the sample. - Radioactive decay follows first-order kinetics, which is why every isotope has a single fixed half-life. ## FAQs ### What is half-life in AP Chemistry? Half-life (t½) is the time needed for the concentration of a reactant to fall to half its initial value. In AP Chem it's tested in Unit 5 kinetics, where the key formula for first-order reactions is t½ = 0.693/k. ### Is half-life always constant? No. Half-life is only constant for first-order reactions. A second-order half-life depends on the initial concentration and increases as the reactant gets used up, which is exactly why constant half-life works as evidence of first-order kinetics. ### How is half-life different from the rate constant? The rate constant k measures the intrinsic speed of a reaction, while half-life measures the time to lose half the reactant. For first order they're inversely related through t½ = 0.693/k, so a fast reaction (big k) has a short half-life. ### How do I calculate how much is left after multiple half-lives? Divide by 2 once for each half-life that passes. For example, an isotope with a 15.0-day half-life starting at 8.00 g goes through three half-lives in 45.0 days, leaving 8.00 → 4.00 → 2.00 → 1.00 g. ### Is the half-life equation on the AP Chem formula sheet? Yes. The first-order half-life equation t½ = 0.693/k is provided on the AP Chemistry equations and constants sheet, so you need to recognize when to use it, not memorize it. ## Related Study Guides - [5.4 Elementary Reactions](/ap-chem/unit-5/elementary-reactions/study-guide/SPsFzzECb4aCre0wFrGg) ## Structured Data ```json {"@context":"https://schema.org","@graph":[{"@type":"LearningResource","@id":"https://fiveable.me/ap-chem/key-terms/half-life#resource","name":"Half-Life — AP Chemistry Definition & Exam Guide","url":"https://fiveable.me/ap-chem/key-terms/half-life","learningResourceType":"Concept explainer","educationalLevel":"AP® / High School","about":{"@id":"https://fiveable.me/ap-chem/key-terms/half-life#term"},"audience":{"@type":"EducationalAudience","educationalRole":"student"},"dateModified":"2026-06-11T00:49:47.721Z","isPartOf":{"@type":"Collection","name":"AP Chemistry Key Terms","url":"https://fiveable.me/ap-chem/key-terms"},"publisher":{"@type":"Organization","name":"Fiveable","url":"https://fiveable.me"}},{"@type":"DefinedTerm","@id":"https://fiveable.me/ap-chem/key-terms/half-life#term","name":"Half-Life","description":"Half-life (t½) is the time required for the concentration of a reactant to fall to half its initial value; in AP Chem Unit 5, a constant half-life signals a first-order reaction, where t½ = 0.693/k regardless of how much reactant you start with.","url":"https://fiveable.me/ap-chem/key-terms/half-life","inDefinedTermSet":{"@type":"DefinedTermSet","name":"AP Chemistry Key Terms","url":"https://fiveable.me/ap-chem/key-terms"},"educationalAlignment":[{"@type":"AlignmentObject","alignmentType":"educationalSubject","educationalFramework":"AP® Course and Exam Description","targetName":"AP® Chemistry Unit 5, Topic 5.4, LO 5.4.A"},{"@type":"AlignmentObject","alignmentType":"educationalSubject","educationalFramework":"AP® Course and Exam Description","targetName":"AP® Chemistry Unit 5, Topic 5.3, LO 5.3.A"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What is half-life in AP Chemistry?","acceptedAnswer":{"@type":"Answer","text":"Half-life (t½) is the time needed for the concentration of a reactant to fall to half its initial value. In AP Chem it's tested in Unit 5 kinetics, where the key formula for first-order reactions is t½ = 0.693/k."}},{"@type":"Question","name":"Is half-life always constant?","acceptedAnswer":{"@type":"Answer","text":"No. Half-life is only constant for first-order reactions. A second-order half-life depends on the initial concentration and increases as the reactant gets used up, which is exactly why constant half-life works as evidence of first-order kinetics."}},{"@type":"Question","name":"How is half-life different from the rate constant?","acceptedAnswer":{"@type":"Answer","text":"The rate constant k measures the intrinsic speed of a reaction, while half-life measures the time to lose half the reactant. For first order they're inversely related through t½ = 0.693/k, so a fast reaction (big k) has a short half-life."}},{"@type":"Question","name":"How do I calculate how much is left after multiple half-lives?","acceptedAnswer":{"@type":"Answer","text":"Divide by 2 once for each half-life that passes. For example, an isotope with a 15.0-day half-life starting at 8.00 g goes through three half-lives in 45.0 days, leaving 8.00 → 4.00 → 2.00 → 1.00 g."}},{"@type":"Question","name":"Is the half-life equation on the AP Chem formula sheet?","acceptedAnswer":{"@type":"Answer","text":"Yes. The first-order half-life equation t½ = 0.693/k is provided on the AP Chemistry equations and constants sheet, so you need to recognize when to use it, not memorize it."}}]},{"@type":"BreadcrumbList","itemListElement":[{"@type":"ListItem","position":1,"name":"AP Chemistry","item":"https://fiveable.me/ap-chem"},{"@type":"ListItem","position":2,"name":"Key Terms","item":"https://fiveable.me/ap-chem/key-terms"},{"@type":"ListItem","position":3,"name":"Unit 5","item":"https://fiveable.me/ap-chem/unit-5"},{"@type":"ListItem","position":4,"name":"Half-Life"}]}]} ```